Salient Feature

• Beaters are hardened & fully machined & balanced.

• Effective and Continuous crushing, leading to increased production and faster return on investments.

• Suitable for Wet-Pulpy and dry crushing

• Compact Size.

• Dust free operation. No wastage of product and no pollution hazards.

• The Wet cum dry grinder grinds almost all Spices, green chilies, fresh ginger, garlic, salt, sugar, coffee, fresh fruits, fruit pulp, vegetables, tobacco, herbs, beetle nuts, herbs roots, leaves, bark of trees, oil cake, cattle and poultry feeds, icing sugar, custard powder, instant food, food colors and allied food production.

Standard Accessories:

• A set of three Nos. perforated round hole screens are supply with the machine

• 3-meter cable with plug with M.C.B. Along with ampere meter will be fit for overload protection for motor.

• One number Brush for cleaning of machine

• Electric motor.

Operations: -

The flow of material from the Feeding Hopper is regulating by means of side handle easily to suit the load. Rotor with four cutters runs in anti-clockwise direction. The beaters pass just beneath the Ratchet Teeth Liner fitted inside the top half of the crushing chamber, leaving a gap of 1/8" between the liner teeth and the tips of the rotating beaters. This cuts the material caught between the liner teeth like a sword with a scissors action at a high speed of 2880 rotations per minute. After the required size reduction, the material will pass through the screen fitted inside the lower discharge end of the grinding chamber. No sieving is required, as the appropriate size screen fitted will not allow coarser material to pass through. The air generated in the crushing chamber forces the powder to pass through the screen fitted at the bottom discharge end of the crushing chamber, into a Filter attached to the delivery trough below. (When crushing Wet-Pulpy materials, the balloon should not be use)

Servicing Guidelines

Open the cover of chamber all grinding parts cleaned with a brush in couple of minute and the Pulverizer is ready for next crushing. If required, the grinding chamber can also be wash with water. Remove the cotton balloon and the screen, close the cover tightly and start the grinder. Now pour a bucket or two of water into the hopper. The grinding parts will be flushed with the water and cleaned. Continue running the machine for a few more minutes as the draft of the fresh air sucked into the grinder will dry it. The beater when worm out removed and reserved by removing the cur clip lock holding to the rotor pins. When both the edges are worm out, they sharpened on an emery stone, to be use as new. In addition, when completely warn out, replaced the equal weight and refitted.